John Camacho, 36th Civil Engineer Squadron sheet metal mechanic, uses a Pullmax machine to cut a circular piece of metal March 25, 2014, on Andersen Air Force Base, Guam. As structural specialists, 36th CES members fabricate a variety of custom products varying from secure door and lock systems to air conditioning ducts. (U.S. Air Force photo by Senior Airman Katrina M. Brisbin/Released)
Airman 1st Class Amee Gonzalez, 36th Civil Engineer Squadron structural apprentice, measures a piece of galvanized coated steel March 25, 2014, on Andersen Air Force Base, Guam. Although a structural apprentice receives training in welding, carpentry, locksmithing, masonry and sheet metal work, they are also paired with a civilian counterpart in a specific field to sharpen their skills. (U.S. Air Force photo by Senior Airman Katrina M. Brisbin/Released)
The rough sketch for a replacement duct in building 26006 is placed on a table to be used as a reference March 25, 2014, on Andersen Air Force Base, Guam. Prior to installation, job schematics are first sketched, verified and then cut into the appropriate pattern out of sheet metal. (U.S. Air Force photo by Senior Airman Katrina M. Brisbin/Released)
John Camacho, 36th Civil Engineer Squadron sheet metal mechanic, removes a drive slip joint using a slide hammer March 25, 2014, on Andersen Air Force Base, Guam. The current ductwork at building 5104 is being replaced with a newer and more eco-friendly unit. (U.S. Air Force photo by Senior Airman Katrina M. Brisbin/Released)
Antonio Malanum, 36th Civil Engineer Squadron sheet metal mechanic, welds the side of a panel March 25, 2014, on Andersen Air Force Base, Guam. 36th CES Airmen plan, construct, maintain and repair wooden, masonry and concrete structures, including concrete footings, foundations, walls, floor slabs, piers and columns. (U.S. Air Force photo by Senior Airman Katrina M. Brisbin/Released)
North Gate Visitor Control Center:
Pass & ID Office:
Organizational Email Box: 36sfs.vcc@us.af.mil
**All Contractors, Busses, Commercial Vehicles MUST go through the North Gate per 36 Wing Installation Defense Plan**
North Gate CVIA:
**Person(s) not in possession of a Military ID, DoD Civilian/Contractor ID, or active Base Access Pass MUST enter Andersen AFB through the North Gate Visitor Control Center (VCC)**
DBIDS Pre-Enrollments:
Unescorted/Escorted Methods:
**Processing takes between 5-7 business days upon receipt and is vetted in the order we receive requests**
**The sponsor will receive tracking numbers via email OR after the processing time has elapsed call 671-366-5650**
**All emailed forms must be typed out if sent digitally and all IDs must be clear/free of obstructions**
**All handwritten forms must be legible if sent digitally or brought to the Pass & ID Office**
Guests Must Have One (01) of the Following Options:
Sponsorship:
Installation Access Forms/Information:
**If applicable, sponsor is responsible for filling out FVR information & must attach FVR to their package**
What if my Military ID Card is expired or going to expire?
Military Personnel Flight (MPF) – ID/CAC Card Processing
Phone Number: 671-366-2276/4812